IOGEAR GCS634U KVM Hotkey Sequence

Going to keep this one short and sweet.

The hot key for a IOGEAR GCS634U KVM is scroll lock + scroll lock + port number + Enter. Or to put it another way, double scroll lock, then the number (1-4) of the KVM port you want to switch to, then press Enter.

I was using a for the first time in a while and could not remember the correct hot key combination to switch the video input. I was in a bit of a hurry and had to do a little digging before I found the answer. So after that I wanted to put this up in case I can save someone some time when searching for the key combination. Also, I'm pretty sure this hot key also works on the GCS632U as well as many other KVMs.

Thanks for stopping by and if you liked this post please leave us a comment.

IOGEAR 4-Port USB Cable KVM Switch GCS24U (Black)



Subscribe to our e-mail newsletter to receive updates.

, , , , , , ,

2 Responses to IOGEAR GCS634U KVM Hotkey Sequence

  1. Chris Andrews November 8, 2010 at 7:00 am #

    I too had not used my IOGear KVM for quite a while and couldn’t find the documentation for it. Thanks for the post; you saved me having to do the digging myself.

  2. MARV December 4, 2012 at 6:03 am #

    my key board was replace and now the new one will not change the display. put the old one back and the same problem. unhook the usb and hook it up on both cpu,s and it will change sides but it will not work with the hot key.
    let me know if you can help.

Leave a Reply